Slab end

Fixed height, 730 mm

A 25 mm panel end with the modesty panel bolted to it, on adjustable glides. Fixed at 730 mm; a static desk, so no load rating applies. The simplest system: it hides cables, legs and bags from the front and matches Emerge storage. Shown cut short, the modesty panel runs the full width.

Metal leg

Fixed height

One 50 × 80 steel column on a T-foot, fixed at 730 mm. Static desk, no load rating applies. Lighter than a slab end, open underneath, black or white frame, and the same frame as the back-to-back workstations.

Single motor

2 stage, 730 to 1170 mm, 80 kg

One motor under the beam turns a shaft into a gearbox on each column, and the inner section rises out of the outer. 730 to 1170 mm, rated to 80 kg: a laptop, one screen and the usual clutter. Three memory heights. The lowest priced way to stand.

Dual motor

2 stage, 730 to 1200 mm, 120 kg

Same two-section column, but a motor sits inside the top of each column: no shaft or gearbox under the beam and more lifting power. 730 to 1200 mm, rated to 120 kg, enough for two screens, a fitted drawer and a hutch. Controller with three memories plus USB-A and USB-C charging.

Drawn from the single motor column: no dual 2-stage frame file yet.

Dual motor, 3 stage

3 stage, Rapid Assembly, 630 to 1280 mm, 160 kg

Three nested sections with a motor inside each column; half the travel comes from the middle section, half from the top. 630 to 1280 mm, the widest range, rated to 160 kg for heavy setups. Rapid Assembly: the frame goes together in minutes and comes apart the same way for a move.

Column from the back-to-back frame file; that frame stands on glides, so the T-foot is borrowed from the straight desk frame.